logo GAS DETECTION SYSTEMS FOR SAFE ENERGY Toll-free - 1-877-723-5400  
  

  Home

  Contact Neodym

  Part Number Generators

  Products
    - Accessories
    - Evaluation Kits
    - Comparative Matrix
    - HydroKnowz™
    - ProtiSen™
      - Features
      • Details
      - Options
      - Gallery
    - Panterra
    - PowerKnowz™
    - MiniKnowz™
    - Knowz™
    - KnowzNet™
    - Under Development

  Order Online

  Privacy Policy

  Site Map

  Technical Support

  Terms of Use

 
  P r o t i S e n ™

PowerKnowz
  P r o t i S e n ™

Catalytic hydrogen sensing module.



   $151 to $179 depending on options

 (Add to cart via part number generator)
 
Product Links

> Features
> Details
> Spec sheet (PDF)
> Datasheet (PDF)
> Ordering options
> Part No. Generator
> Gallery

Related Links

> Eval. Kits
> PK-Port™ (PDF)


  PRODUCT DETAILS

Full details including operational description, user instructions, specifications, ordering options, and mechanical disagrams are available in the product datasheet (see Product Links).

Warning & Alarm Levels

  • Alarm & warning PPMs specified at order time
  • Alarm level from 4,000 to 32,000 ppm
  • Warning level/action is optional
  • Warning level from 20-80% of alarm level
  • Levels are field-adjustable via PK-Port™


  • State Indications

  • Normal, warning, alarm & error state
  • Bi-color LED indicates all states
  • Errors-as-Alarms for fail safe operation
  • Warning and/or alarm trigger TTL/output FET
  • Live monitoring & data logging via PK-Port


  • Reliability Features

  • Audio-visual or alarm-producing errors
  • Sensor failure & disconnection detection
  • Temperature out-of-bounds detection
  • Digital calibration values delimited
  • Low supply voltage inhibit
  • Power fail detect via signal offset loss/relay
  • Watchdog timer & software checksums


  • Environmental Requirements

  • Diffusion sampling
  • 3 meters/second flow rate maximum
  • 5% minimum atmospheric oxygen
  • 0% to 99% R.H. (non-condensing) oper.

  •   Calibration

  • All devices individually calibrated
  • FLASH-based calib. accessible via PK-Port
  • Periodic factory recertification avail.


  • Incompatible Uses

  • Not for use in anaerobic environments
  • No dusty or corrosive environments
  • No condensing moisture
  • May be adversely affected by high
  •     concentration silicone vapors

    PK-Port Interface

  • Access via interface connector pin
  • PC (serial) interface module extra
  • Real-time monitoring and data-logging
  • Access/modify config. & cal. values


  • Mechanical

  • Aluminum enclosure size: 51 x 51 x 19 mm
  • Enclosed weight: 50 g


  • ©1999-2013 Neodym Systems Inc. All rights reserved.